Vacate Cleaning Melbourne from $290: Agent-Approved Move-Out Cleans

The Ultimate Move-Out Checklist: Essential Steps for Stress-Free Vacate Cleaning Melbourne

Moving out of a rental usually ends with a final inspection, and most tenants are expected to hand the property back clean. High Power Cleaning handles vacate cleaning Melbourne renters can book for an empty property. We work room by room against the things agents tend to look at, so you aren’t guessing what you’ve missed.

The lease and your entry condition report are the best guide to what is expected, so check both before you book. Many agents compare the property at exit with the condition it was in when you moved in. If you’re unsure what your clean needs to include, call 1300 997 289 or send the free quote form on our site.

What Vacate Cleaning Covers in a Melbourne Rental

A vacate clean is a detailed clean of a rental property at the end of a tenancy. It is the same job as an end of lease clean or an end of tenancy clean. Different agents, landlords and tenants use different names, but the aim is the same: the property is clean enough to hand back when the keys go in.

The clean is done once the property is empty, and it covers the internal areas. With no furniture or boxes in the way, we can reach places that are hard to get to while you’re still living there.

How it differs from tidying

Tidying is what most people do before they leave: clearing the rubbish, wiping the benches, vacuuming the floors. A vacate clean goes further into the detail that inspectors check. For example:

  • Rangehood filters
  • Oven rails, with the oven and stove cleaned as part of the job
  • Shower glass
  • Window tracks
  • Skirting boards

These are the spots that build up grime over a tenancy and are easy to miss when you clean your own place.

Carpet and windows

Some leases and entry condition reports call for carpet steam cleaning, window cleaning, or both. If yours does, either can be added to the same booking. We confirm what’s included in the quote, so there are no surprises on the day.

Pricing and timing

The Vacate Cleaning Checklist: Kitchen, Bathrooms and Laundry

Room-by-Room Vacate Cleaning Checklist

Kitchens, bathrooms and laundries are where most of the grease, soap scum and limescale build up over a tenancy. They are also where many agents spend the most time at the final inspection. This checklist follows the same room-by-room approach a vacate clean should take. Check your lease and entry condition report as well, because they set the standard you are measured against.

Kitchen

The oven is the item most often missed. Baked-on grease, burnt spills and dirty racks are easy for an agent to spot, and they take real time to remove. The oven and stove are part of our vacate clean, but if you are doing the job yourself, allow plenty of time for them.

  • Oven interior: walls, roof, door glass, racks and oven rails or side supports
  • Stovetop: burners, trivets, control knobs and the surface underneath them
  • Rangehood: filters, the hood exterior and the underside, where grease collects
  • Cupboards and drawers: empty, wiped out inside, with handles and fronts cleaned
  • Benchtops, splashback and tile grout behind the stove and sink
  • Sink and tapware: remove marks and residue, and clear the drain strainer
  • Dishwasher, if fitted: filter, seals and door edges
  • Fridge space, if it is part of the property: wipe the inside, shelves and seals, and clean behind it if it can be moved
  • Skirting boards, light switches, door frames and the floor edges

Rangehood filters and oven rails fail often because they are out of sight during daily use. Grease builds up gradually, so you stop noticing it, but an agent opening the oven or lifting out a filter will see it straight away.

Bathrooms

Bathrooms are judged on detail. A shower can look fine from the doorway and still show soap scum on the glass, limescale on the tapware and dark grout once the agent looks closely. Many agents also check for hair and residue in drains and under the vanity.

  • Shower screen: glass, frame, door tracks and seals, with scum and water spots removed
  • Shower base and walls: limescale, soap residue and mould around silicone edges
  • Grout lines: scrub where discolouration has built up, especially low on the walls and in corners
  • Taps, shower head and fixtures: descale and polish
  • Drains and plugholes: remove hair and build-up
  • Bath, if there is one: inside, outside, the overflow and the tap surrounds
  • Toilet: bowl, under the rim, cistern, seat, hinges and the base around the floor
  • Vanity: basin, benchtop, mirror, and the cupboards and drawers inside and out
  • Exhaust fan cover and light fittings, wiped of dust
  • Floor, skirting boards and door tracks, including window tracks if the bathroom has a window

Limescale and grout are the common failures. Limescale gets worse the longer it sits, so a quick wipe rarely removes it. Grout holds moisture and dirt, and stained grout is a common reason an agent marks a bathroom as not clean enough.

Laundry

Laundries are often left until last, and that is usually where the missed spots are. They are small rooms with lint, detergent residue and damp corners, and agents tend to check them as carefully as any other room.

  • Laundry tub: scrub the basin, taps and overflow, and clear the drain
  • Cabinets and shelves: empty and wipe inside and out
  • Washing machine space: wipe around the taps, the wall behind and the floor underneath if the machine is not staying
  • Dryer space or exhaust area, if applicable: remove lint from surfaces and vents you can reach
  • Walls and splashback: remove splashes, powder marks and scuffs
  • Window sills and tracks: vacuum out dirt and dead insects, then wipe clean
  • Skirting boards, door frames and the floor, including the corners

The laundry tub is the usual problem. Lint, detergent scum and discolouration around the drain show up quickly against a white or stainless basin. Damp corners can also develop mould, so it is worth checking behind the machine before the final inspection.

Timing the clean

These rooms are easiest to inspect and finish once the property is empty, because you can reach behind appliances and see the corners properly. If you are booking vacate cleaning Melbourne tenants rely on before handing back the keys, one to two weeks before move-out is ideal, especially around the end of the month. The minimum is a few days before the final inspection, once the property is empty. For short-notice enquiries, call 1300 997 289, or use the free quote form on our site. The final price is quoted after inspection.

The Vacate Cleaning Checklist: Bedrooms, Living Areas, Windows and Floors

Agents usually inspect an empty property room by room, comparing it with the entry condition report. This checklist follows the same order. Use it to do your own vacate clean, or to check over a professional job before the final inspection. Whichever you choose, vacate cleaning Melbourne agents will inspect is easiest once the furniture is out, because walls, skirting boards and floor edges are fully visible.

Bedrooms

  • Walls and marks: wipe scuffs, fingerprints and dust marks, especially around switches, door frames and bed heads. Test a small hidden spot first so you don’t lift the paint.
  • Skirting boards: dust and wipe the full length, including the stretches that were behind beds and drawers.
  • Doors and frames: wipe both sides of the door, the handle, the top edge and the frame.
  • Switches and power points: wipe the faces and surrounds.
  • Light fittings and ceiling fans: dust blades and shades, and clear any dead insects from light covers.
  • Wardrobes: empty them completely, then wipe shelves, rails, drawers, the insides of doors and sliding door tracks.
  • Floors: vacuum last, once everything above has been dusted down.

Living Areas

  • Walls: check high-traffic spots such as hallways, around the TV and behind couches, where marks tend to build up.
  • Skirting boards and door frames: these are often missed, and they are easy for an inspector to run a finger along.
  • Light fittings, switches and power points: same as the bedrooms.
  • Vents and wall-mounted units: dust and wipe the visible surfaces of vents, heaters and air conditioners. Check your lease and entry condition report for anything specific listed.
  • Built-in cupboards and shelving: empty, wipe inside and out, and check corners.

Windows, Tracks and Blinds

  • Window tracks: vacuum out loose dirt first, then wipe with a damp cloth. A small brush helps in the corners.
  • Sills and frames: wipe away dust, spots and any mould or grime that has built up.
  • Glass: clean the inside of the windows and any sliding doors, and wipe off smudges and handprints.
  • Blinds and curtain tracks: dust each slat, or wipe roller blinds as the material allows. Take down your own curtains and check the tracks.
  • Window cleaning as an add-on: if your lease or entry condition report calls for professional window cleaning, it can be added to the same booking. It is confirmed in the quote.

Floors and Carpets

  • Hard floors: sweep or vacuum first, including edges and corners, then mop. Check under where appliances and furniture stood.
  • Carpets: vacuum thoroughly, edge to edge and inside wardrobes.
  • Carpet steam cleaning: many agents expect it, but not all do, so check your lease and entry condition report. If it is required, steam cleaning can be added to the same booking and confirmed in the quote. Some agents ask for proof, so keep any paperwork.
  • Stains: treat marks early rather than leaving them to the end. Note any that were already on the entry condition report.

Balcony, Patio and Garage

  • Balcony or patio: sweep away leaves and dirt, clear cobwebs, and wipe down railings and door tracks leading outside.
  • Garage or carport: remove all belongings and rubbish, then sweep the floor. If there are oil marks, check what your agent expects.
  • Storage areas: empty them and give shelves a quick wipe.

Our vacate clean covers internal areas, so if you want outdoor areas looked at, ask when you request your quote.

Before the Final Inspection

Do a walk-through in daylight with the entry condition report in hand, and check each room against it. Look at the places agents commonly check: skirting boards, tracks, wardrobe shelves and light fittings. If you would rather hand the job over, call 1300 997 289 or use the free quote form. The final price is confirmed after inspection.

What Property Managers Look For at the Final Inspection

High-Touch Details Property Managers Always Inspect

The final inspection is where the agent or property manager checks whether the property is being handed back in a condition consistent with how it started. Knowing how it usually runs helps you clean for what will actually be checked, rather than guessing.

How an exit inspection typically works

Many agents book the inspection once the property is empty, often with the entry condition report in hand. They usually go room by room, compare each area with what was recorded at the start of the tenancy, and take photos as they go.

Their notes tend to fall into two groups. The first is cleanliness: dust, grease, soap scum and marks that could be removed with proper cleaning. The second is condition: chips, holes, stains, scratches and worn finishes. Because the entry condition report and its photos are the reference point, what was recorded at move-in matters. Check your lease and your copy of that report to see what applies to your tenancy.

Cleaning issues versus damage and fair wear and tear

These are treated as different things. A cleaning issue is dirt or build-up that can be removed. Damage is a physical change that cleaning will not fix, such as a gouge in a door or a burn mark on a bench.

Fair wear and tear is generally understood as the gradual deterioration that comes from normal, reasonable use over time, such as lightly faded paint or flattened carpet in a hallway. It is usually distinguished from harm caused by accident, misuse or neglect. Where that line falls can be disputed, so check your lease, your entry condition report and the information from your state’s tenancy authority rather than assuming.

A spotless room does not erase damage, and a note about marks is not automatically a cleaning complaint. It helps to know which category each item falls into.

Items that often get flagged

Every agent is different, but these areas come up often:

  • Rangehood filters and the grease around the hood
  • The oven and stovetop, including racks, rails, the door glass and the burners
  • Shower glass, screens, grout, taps and drains, where soap scum and mineral marks collect
  • Window tracks and sills, including dust and dead insects
  • Skirting boards, door frames, light switches and power points
  • Inside cupboards, drawers, the pantry and wardrobes
  • Toilets (base and behind the seat), vanities and mirrors
  • Light fittings, exhaust fans and vents
  • Floors, especially edges and corners where dust and debris gather
  • Carpet stains and marks, and window marks, where the lease or entry condition report calls for those to be addressed

How to prepare

Clean when the property is empty, not while you are still moving furniture. Marks and scuffs from removalists often show up late.

  • Take photos after cleaning. Capture each room with a wide shot, then close-ups of the oven, rangehood, shower, window tracks and any spots you expect to be questioned. Photos with timestamps are more useful if there is a later disagreement.
  • Keep your receipts. That includes any professional cleaning, carpet steam cleaning or window cleaning. Check whether your lease asks for proof of particular services.
  • Be present if you can. Walking through with the agent lets you hear concerns on the spot and point out anything that was already recorded on the entry report.
  • Have your own copy of the entry condition report and any photos you took at move-in.
  • Allow time. Finishing the night before leaves no room to fix anything you miss.

If you are booking a professional clean, one to two weeks before move-out is ideal, especially around the end of the month when diaries fill. The minimum is a few days before the final inspection, once the property is empty. For short-notice enquiries, call 1300 997 289.

If the agent lists items afterwards

Sometimes the list arrives after the inspection. Stay calm and work through it step by step.

  • Ask for the list in writing, with the room, the specific issue and any photos the agent took.
  • Compare each item with the entry condition report. Note anything already recorded at move-in.
  • Sort the items into cleaning, damage, and possible fair wear and tear.
  • Reply in writing, referring to your own photos and receipts where they help.
  • If you disagree, check the dispute process in your lease and with your state’s tenancy authority before agreeing to anything.

A vacate clean from High Power Cleaning is done room by room against the things agents commonly inspect, and the oven and stove are part of the job. Carpet steam cleaning and window cleaning can be added to the same booking when your lease or entry condition report calls for them, and this is confirmed in the quote. If you are weighing up vacate cleaning Melbourne options, send the details through the free quote form or call 1300 997 289.

What Is Included in Vacate Cleaning, and What Is Not

A vacate clean is the same job as an end of lease or end of tenancy clean. It covers the internal areas of an empty rental, room by room, against the things agents tend to check at the final inspection. Here is what that looks like for vacate cleaning Melbourne tenants book before handing back the keys.

Included

  • Oven and stove, including the oven rails
  • Rangehood, including the filters
  • Kitchen and other cupboards, inside and out
  • Bathrooms, including shower glass, plus toilets, vanities and sinks
  • Mirrors
  • Window tracks and sills
  • Skirting boards
  • Doors and door frames
  • Light switches and power points
  • Floors throughout

The work is internal only. It is a cleaning job, not a repair or maintenance job.

Add-ons confirmed in your quote

Some leases and entry condition reports call for more than a standard clean. Two services can be added to the same booking:

  • Carpet steam cleaning. Many agents ask for this, so check your lease and entry condition report.
  • Window cleaning. Worth adding if the report or your agent expects the glass to be done as well as the tracks and sills.

Things to sort out before the clean

A few things need to be in place so the cleaners can work through each room properly:

  • The property must be empty. Furniture and belongings in the way make it hard to clean floors, cupboards and skirting boards.
  • Remove rubbish and leftover belongings. Clearing out is not part of the clean, so deal with it beforehand.
  • Repairs, damage and garden work are separate. Holes in walls, broken fittings, marked paint, and lawns or garden beds are not cleaning. If your agent has raised them, arrange them separately.
  • Power and water should be on. Cleaning ovens, bathrooms and floors usually needs both, so do not disconnect them before the clean.

Read your entry condition report and compare it with the rooms as they are now. If something is unclear, such as marks that may be damage rather than dirt, ask for it to be looked at during the quote.

Timing

Ideally, book one to two weeks before move-out, especially around the end of the month when many leases finish. The minimum is a few days before your final inspection, once the property is empty. For short-notice enquiries, call 1300 997 289 rather than relying on the form.

How Our Vacate Cleaning Process Works

A vacate clean is the same job whether your lease calls it end of lease, end of tenancy or move-out cleaning. Here is how vacate cleaning Melbourne tenants book with us runs from first contact to hand-back.

  1. Get a quote. Call 1300 997 289 or fill in the free quote form on our site. Tell us the size of the property and whether you need carpet or window cleaning. The final price is quoted after inspection.
  2. Confirm your date around hand-back. Ideally, book one to two weeks before move-out, especially around the end of the month. The minimum is a few days before your final inspection, once the property is empty. If you are short on time, call us.
  3. Empty the property. We clean empty properties, so furniture and belongings need to be out first. That lets every room, cupboard and corner be reached properly.
  4. Room-by-room clean. We work through the internal areas one room at a time. The oven and stove are part of the clean, along with the items agents often check, such as rangehood filters, oven rails, shower glass, window tracks and skirting boards.
  5. Add-ons, if booked. Carpet steam cleaning and window cleaning can go on the same booking when your lease or entry condition report calls for them. These are confirmed in your quote.
  6. Check the property before your inspection. Walk through with your entry condition report and any checklist from your agent. This shows you what the agent will see when they inspect.

Why working room by room against the agent’s list helps

Agents rarely judge a property on a general impression. Many go through it room by room, comparing it with the entry condition report and checking the same problem spots: the oven, the shower, the window tracks, the skirting boards. A clean that follows that order is less likely to miss something that gets noted on the day.

It also keeps the work easy to follow. Because each room is finished before moving on, you can check it in the same sequence an agent would. If your lease lists specific requirements, such as carpets or windows, check your lease and entry condition report and raise them when you get your quote so they are confirmed before the booking.

The aim of this exit clean is simple: when you hand back the keys, the property is ready to be checked against the list the agent is working from.

When to Book Your Vacate Clean

Timing matters more than most tenants expect. Ideally, book your vacate cleaning Melbourne job one to two weeks before move-out. That gives you time to get a quote, confirm what is included and choose a day that suits your handover, rather than taking whatever is left.

Why the end of the month fills up

Many leases finish at the end of the month, so plenty of tenants are looking for a move-out clean in the same few days. If your lease ends then, aim for the two-week end of the range. Booking early does not lock in a particular day, but it gives you more choice.

Clean once the property is empty

A vacate clean is done in an empty property, and that shapes when you book it. The best window is after the furniture and boxes are out and before the final inspection. Once the rooms are clear, the cleaner can work room by room through the things agents tend to check: rangehood filters, oven rails, shower glass, window tracks and skirting boards. The oven and stove are part of the clean. With furniture still in place, many of these spots are blocked or hidden.

If you are cutting it fine, the minimum is to book a few days before the final inspection, once the property is empty.

Coordinate carpet cleaning and handover

Check your lease and entry condition report to see whether carpet steam cleaning or window cleaning is expected. Both can be added to the same booking, and the quote confirms exactly what is included. Mention them when you ask for a quote so everything is planned together instead of arranged separately. Also keep your key handover and inspection times in mind, so the clean finishes before the agent walks through.

A simple timeline

  • Two weeks out: Check your lease and entry condition report, then request a free quote through the form on our site and tell us about any carpet or window requirements.
  • One week out: Confirm your booking and the day. Start packing the rooms you use least so the property empties on schedule.
  • Moving day: Remove all furniture, boxes and rubbish. Leave the property fully empty, including cupboards and the oven.
  • Clean: Book the exit clean for after you have moved out and before the inspection. If carpet cleaning is part of the booking, it is confirmed in the quote.
  • Inspection day: Do a final walk-through against your entry condition report before you hand back the keys.

If you are short on time

If your move-out is close and you have not booked, call 1300 997 289 and explain your dates. Availability at short notice varies, so we cannot promise a slot, but a call is the quickest way to find out what is possible. The final price is quoted after inspection, so having your property size and requirements ready will help.

The earlier you book, the fewer decisions you will be making in the last days of your tenancy, when you are also dealing with removalists and keys.

Vacate Cleaning Melbourne Price Guide

These are from prices for an empty property. The final price is quoted after inspection.

Cleaning Prices in Melbourne

Prices are “from” prices for an empty property. The final price is quoted after inspection.

Property size From
Studio / 1 bedroom from $290
2 bedroom from $380
3 bedroom from $470
4 bedroom from $590

Call 1300 997 289 or use the free quote form for your final price.

Related pages: end of lease cleaning, move-out cleaning and carpet steam cleaning.

Suburbs We Clean Across Melbourne

We do vacate cleaning across Melbourne, including these suburbs. If yours is not listed, call 1300 997 289 and ask, or check our end of lease cleaning page for more areas.

Vacate Cleaning Melbourne: Frequently Asked Questions

What does a vacate cleaning Melbourne service include?

A vacate clean covers the internal areas of an empty rental room by room: oven and stove, rangehood and filters, kitchen cupboards, bathrooms, mirrors, window tracks and sills, skirting boards, doors, light switches and floors. Carpet steam cleaning and window cleaning can be added to the same booking and are confirmed in your quote.

How much does a vacate cleaning Melbourne booking cost?

Prices start from $290 for a studio or one-bedroom, from $380 for two bedrooms, from $470 for three and from $590 for four. These are from prices for an empty property, and the final price is quoted after inspection. Call 1300 997 289 or use the free quote form.

Is vacate cleaning the same as end of lease cleaning?

Yes. Vacate cleaning, end of lease cleaning and end of tenancy cleaning describe the same clean at the end of a rental. We use the vacate wording for tenants leaving any kind of property, including share houses and short tenancies.

When should I book vacate cleaning?

Ideally one to two weeks before your move-out date, and earlier at the end of the month when many leases finish. The clean works best once the property is empty and before your final inspection, so booking a few days ahead is the minimum.

Does the property need to be empty?

Yes. Cleaning is done on an empty property so the cleaners can reach every cupboard, wall, window track and floor. Move your furniture and belongings out first.

Do I need carpet steam cleaning when I move out?

Many leases and entry condition reports call for it, particularly if pets lived in the property. Check your lease and ask your agent. We can add it to the same booking and confirm it in your quote.

Can you clean the oven and rangehood?

Yes. The oven, stove and rangehood are part of the clean. These are among the items agents check most closely at the exit inspection.

What if my agent lists items after the inspection?

Ask for the list in writing and compare it with your entry condition report and your own photos taken after the clean. Call us on 1300 997 289 if you have questions about a booking.

Do you clean houses as well as apartments?

Yes. The checklist applies to apartments, units, townhouses and houses. Larger properties cost more, which is why the price guide is set by number of bedrooms.

How do I get a quote for vacate cleaning in Melbourne?

Call 1300 997 289 or use the free quote form on this site with your suburb, property size and hand-back date.

Book Your Vacate Clean

Tell us your suburb, the size of the property and your hand-back date, and we will confirm a quote. Call 1300 997 289 or use the free quote form on this page.